Work

Where an autonomous survey earns its place.

Each of these is a market we serve, not a list of past projects. Every site is different, so we start with the question you need answered.

Offshore

Jacket legs and subsea pipelines, recorded in 3D.

Ageing fixed structures and their pipelines still need a clear, comparable picture of condition and position. An autonomous survey can collect close-range imagery of legs, nodes and members, and acoustic and visual data along a pipeline corridor, without building the campaign around a large vessel-and-ROV spread.

Typical deliverables

  • Photogrammetry-derived 3D model of the structure or selected members
  • Pipeline position and depth profile; depth of burial
  • Free spans, out-of-straightness, exposure and mechanical-protection status
  • Corridor debris, seabed change and marine growth
  • Cathodic-protection survey data where the scope includes it
  • Structured maps and an inspection record
Offshore wind

Array and export cables, and floating-wind moorings, checked on a planned cycle.

Subsea cables and mooring lines are among the parts of an offshore wind farm that most need a reliable, repeatable inspection. Autonomous surveys can document burial, exposure, debris and condition, and return a 3D record of touchdown and mooring sections that can be compared on the next visit. Intervals follow the owner’s risk model.

Typical deliverables

  • Cable route and burial or exposure status
  • Corridor debris and seabed change
  • Mooring and touchdown 3D models
  • A baseline for later comparison
  • A structured inspection record for the owner’s integrity process
Inland

Flooded pits and former mine lakes, mapped from the shoreline to the bed.

Former tin-mining country in Malaysia and nearby left a large number of flooded pits and ponds. Many are still measured sparsely from a small boat. A full survey can give volume, bed shape, slime thickness and a 3D view of the slopes: a baseline before redevelopment, or a repeat model as the site changes.

Typical deliverables

  • Bathymetric 3D model from shoreline to bed
  • Volume
  • Slime or sediment thickness where a sub-bottom sensor is in the scope
  • Slope and wall imagery
  • A water-quality profile if requested
  • A baseline for later comparison
Heritage

A 3D record of a wreck, and a way to see if it has been disturbed.

Heritage wrecks and protected sites need a careful, repeatable record, not a one-off film. A baseline 3D model, followed by planned return visits, can show whether the site has changed. This work is sensitive: any war-grave site is surveyed only with the relevant authorities.

Typical deliverables

  • Baseline 3D model and site plan
  • Scheduled repeat surveys
  • A change report
  • An archive-grade record for the heritage or managing body
Inland

Know the lakebed before you anchor, and check the moorings afterwards.

Floating solar and off-river storage ponds are often built on soft, uneven former-mine beds. A survey-grade model of the bed, slime and any debris supports anchoring design. After installation, the same method can inspect moorings and anchors on a planned cycle.

Typical deliverables

  • Bed and slime model
  • Debris and obstruction map
  • Post-installation mooring and anchor 3D inspection
  • Repeat surveys over the operating life of the asset
Water

Reservoir capacity and submerged works, surveyed without draining the water.

Reservoirs lose capacity to sediment, and dam faces, intakes and gates still need an underwater inspection. A repeatable bathymetric model tracks how the basin is changing. Close-range 3D inspection can be used on the submerged faces and works, in line with the owner’s inspection programme.

Typical deliverables

  • Reservoir-wide bathymetric model and volume
  • A capacity-change comparison against an earlier survey
  • 3D inspection of the upstream face, intakes or gates as scoped
  • A structured inspection record
Coastal

Berths, quay walls and nearshore approaches, in a model you can compare after the next dredge.

Ports and cable landings need a clear picture of the berth, the wall or piles, and the nearshore seabed, often in busy, shallow water. A compact autonomous survey can produce a 3D condition model and a pre- and post-dredge comparison, or a route and burial check on a nearshore cable approach.

Typical deliverables

  • Berth and channel bathymetry
  • Quay-wall or pile 3D condition model
  • Pre- and post-dredge change model
  • Nearshore cable route or burial check as scoped
Start with a briefing

Tell us about the asset, and we will tell you what a survey would involve.